Application for Beacon Light Installation

Beacon light is a type of multi-coloured warning light which is categorised as an accessory component that is normally installed atop a vehicle.

Objective

The use of beacon light is to forewarn other road users that they should slow down their vehicles and be cautious while in the area.

As specified by Rule 24 of the 1959 Motor Vehicle Rules (Traffic), only police vehicles, the Fire Department, JPJ and ambulances are given priority over traffic on any road in Malaysia. However, as specified by Rule 138 (1) of the 1959 Motor Vehicle Rules (Construction and Use), the JPJ Director-General has the discretion to exempt any vehicle from having to adhere to any of the Rules' specifications. Private vehicles are prohibited from installing such a device.

Application

Applications for beacon light installation can be made by writing a formal application letter to this department. The letter must include the following details:

  1. Company background
  2. Purpose of beacon light use
  3. Type of beacon light used
  4. A copy of vehicle registration card

Conditions

Application for beacon light installation shall comply with the following conditions:

  1. The vehicle have been registered as a company vehicle
  2. Application must only be made by the company owner or secretary
  3. Private vehicles are prohibited from installing beacon lights.

Installation

  1. A light-bar type beacon light can only be installed on the vehicle roof permanently without endangering other road users.
  2. The smaller cylindrical-type beacon light can be installed on the roof either permanently or with a magnet.
  3. The use of siren is prohibited at all times except for government agency transports that are permitted under the law.

Use

Vehicles that are permitted to install and use beacon light can only do so during formal duty only. The beacon light is not to be used haphazardly as it will interfere with traffic flow.

Tags
vehicle-technical-articles lampu mata arah beacon light
Previous